Back to all

South Side Garage Tire Safety: Washington vs. Lincoln

March 13, 2017

Welcome to the South Side Garage automotive blog. Today, let's talk about the effect of

Let's focus on stopping in wet Moore conditions. In order for a tire to have good contact with the road, it has to move the water out of the way. If it can't move the water, the tire will actually ride on top of a thin film of water.

That's called hydroplaning. If it's really bad, Moore drivers can actually spin out of control - endangering themselves and the other drivers around them. At best, you won't stop as fast.

So how does a tire move water? It has channels for water to flow through. Look at your vehicle tire and you'll see channels: channels that run around the tire and channels that flow across the tire. They're designed to direct water away from the tire so it can contact the road better.

And the deeper the channel, the more water it can move. A brand new South Side Garage tire has very deep channels and can easily move a lot of water. As the tire wears down, the channels become shallower and can move less water. When it wears down enough, it can seriously affect your ability to stop your vehicle on wet Moore roads.

So that's why it's so important for Moore drivers to replace their vehicle tires when they get worn. Consumer Reports and other advocate groups call for a standard of 3/32 of an inch and they have the studies to prove it.

At South Side Garage, we want our customers to know that the deeper recommended tread depth makes a big difference. Stopping distances are cut dramatically on wet Moore streets. A safe stop from OK speeds with 4/32 of an inch of tread would result in a crash with worn out tires.

There's an easy way to tell when a tire's worn to 4/32 of an inch.

Just insert a quarter into the tread. Put it in upside down. If the tread doesn't cover George Washington's hairline, it's time to replace your vehicle tires. With a Canadian quarter, the tread should cover the numbers in the year stamp.

Many Moore residents have heard of this technique using a penny and Abe Lincoln's head - the old method. That measure gives you 2/32 of an inch – half the suggested amount. Of course, vehicle tires are a major purchase. Most of us in Moore want to get as many miles out of them as we can. But there's a real safety trade-off. It's your choice.

South Side Garage
2220 Pole Rd
Moore, OK 73160
405-308-1514
http://www.thesouthsidegarage.com

More articles from Southside Garage

Start Me Up (Ignition Systems)

October 27, 2025

When you start up your gasoline engine car, you may not know that it's using the same ignition principles as it has for decades. You have spark plugs that require enough power so a spark can jump across a gap at its tip. Years ago, a vehicle's 12-volt system had to produce 15,000-25,000 volts t... More

Timing is Everything (Timing Belt)

October 23, 2025

Talk about exquisite choreography; it happens under the hood of your vehicle every time you take a drive. Your engines many complex parts must work exactly together. One key is a part called a timing belt, which enables the synchronizing of two of your engines components, the camshaft, and the ... More

Oil's Well That Ends Well (Oil Change Grades and Weight)

October 12, 2025

Changing your oil regularly is one of the most important things you can do to keep your vehicle running well. And knowing the right type of oil to use is also very important. Engine oil is classified by weight, but it doesn't refer to how much the oil would weigh if you put it on a scale. It r... More