Back to all

On Board Diagnostics for Your Engine

March 10, 2019

Starting in 1996, South Side Garage service technicians have been able to use a standardized diagnostic system to help determine what is wrong with a vehicle. This diagnostic system works in tandem with the Engine Control Modules for each vehicle's engine. The Engine Control Module is a computer that monitors and controls many engine functions.

Sensors throughout a vehicle send readings to the Engine Control Module. These readings help the computer make adjustments in various vehicle systems to allow for constantly changing driving conditions and even to compensate for minor problems. However, if the computer encounters a situation it can't adjust for, it turns on the Check Engine light. (The Check Engine light is called the “service engine soon” light on some vehicles.)

If the Check Engine light is burning steadily, it indicates a problem that needs to be taken care of soon. If it is flashing, however, the vehicle needs immediate attention at South Side Garage. When the Check Engine light is flashing, the vehicle should not be driven at high speeds, haul heavy loads or tow a trailer. Moore drivers need to understand that doing so can cause major damage.

When a vehicle is brought to South Side Garage in Moore because the Check Engine light is on, a technician will scan the Engine Control Module to learn why it turned the light on. The answer comes as a “trouble code.” The technician has access to software that allows him to enter the code and find out what it means. The software will also let your South Side Garage technician know what might be causing the problem and how to diagnose it.

Notice that the trouble code does not tell your technician at South Side Garage exactly what is wrong with the vehicle. It can only let him know where to start looking to find the problem.

Scanning a trouble code and determining what it means is fairly simple for the pros at South Side Garage. But the ensuing process of actually diagnosing a vehicle's trouble can take a skilled technician some time. Sometimes this can add up to a significant repair bill. Some vehicle owners mistakenly believe  that the “trouble code” is all they need and think they can then fix their vehicles themselves. Some have tried to save money by purchasing an inexpensive scanner, or they take their vehicles to an auto parts store that offers the scan for little or no cost.

These options are often not the money-savers they seem for Moore vehicle owners. They can end up costing the vehicle owner extra in unnecessary repairs and engine damage.

For example, the trouble code P0133 reads “Bank 1 sensor 1 circuit slow response.” Translated, that means the front oxygen sensor shows a slow response time in changing the mix of air to fuel. The seemingly obvious conclusion is that the sensor needs to be replaced. The vehicle owner purchases a sensor, installs it and happily goes on his way.

However, read the trouble again: a slow response time in changing the mix of air to fuel. Nowhere does this indicate that the sensor is bad. There are a lot of parts involved in changing the air-fuel mix, any of which could be causing a slow reaction time. Those include a bad or contaminated airflow sensor, an exhaust leak, a problem in the electrical system or a leak in the intake manifold. The sensor is merely relaying that the response time is slow; it doesn't indicate where the trouble is.

So the vehicle ends up with an oxygen sensor it did not need, and the delay in repairing the actual problem may have led to further damage to the engine. Both are added costs for the vehicle owner.

Cheap scanners also don't have the ability to read the history stored in an engine's computer. This operating history contains clues that can help in diagnosing engine trouble since it can indicate a developing problem. South Side Garage invests a lot of money in high-end diagnostic equipment so that we have access not just to service codes but also to the operating history of the engine.

On-board diagnostics, then, are a tool to help diagnose what is wrong with a vehicle. They cannot specify what part needs to be fixed or replaced, and they cannot replace a well-trained and well-equipped service technician.

Unless you are a trained mechanic, it's good auto advice to use South Side Garage for your car care. In the long run, it can save you time, unnecessary expense and frustration. South Side Garage can also help you keep up with your scheduled preventive maintenance, which can also save you on repair bills by alerting you to potential problems before they get expensive.

South Side Garage
2220 Pole Rd
Moore, OK 73160
405-308-1514
http://www.thesouthsidegarage.com

More articles from Southside Garage

Direct Fuel Injection Update from South Side Garage

March 24, 2024

For those of you in OKLAHOMA CITY, Oklahoma who pay attention to these things, you may have been hearing about the new direct injection engines and want to learn more about them. Some deliver the power of a V8 with the economy of a V6.For example, in one family of engines the conventional V6 mak... More

The Right Automotive Fluids for OKLAHOMA CITY Drivers

March 17, 2024

All those automotive fluids can be confusing for OKLAHOMA CITY drivers. Recent years have brought new grades of engine oil, types of transmission fluid, coolant and brake fluid. The right fluid protects your vehicle and helps it perform at its best. The wrong fluid won't work as well and could ev... More

Technician Training at South Side Garage

March 10, 2024

Your vehicle is important to you, and keeping it running properly is important to your lifestyle. That's why you're smart enough to have it serviced regularly at South Side Garage in OKLAHOMA CITY. And even though it may just be routine maintenance, you want it done right by automotive professio... More