Back to all

Automotive Tips from South Side Garage: Where Should New Tires Be Placed

August 7, 2018

When Moore drivers need to replace tires, they need to know how many they should get and on which axle they should be placed. Replacing a damaged tire may leave you with three others with significant wear, which could affect your traction control, stability control and anti-lock brake systems.

If you can’t afford to replace all four tires at once, you should at least replace two on the same axle. New tires should always be put on the rear axle for stability in slippery conditions. Your friendly and professional South Side Garage tire professional can help you know when your worn tires should be replaced, if you can have a damaged tire repaired as well as selecting the right tires for your needs.

Give us a call.

South Side Garage
2220 Pole Rd
Moore, OK 73160
405-308-1514
http://www.thesouthsidegarage.com

More articles from Southside Garage

No Fueling Around (Fuel Filter Replacement)

September 28, 2025

A driver called in to the shop the other day saying his European sports sedan had an odd problem. He was driving when his car started to slow down. Applying more throttle didn't help. He pulled over to the side of the road, shut the engine off and waited a few minutes before starting it up aga... More

Breathe New Life into Your Engine (MAF sensor replacement)

September 21, 2025

If youve noticed your vehicle is hard to start, stalling, or has lost power, the culprit may be a part with an odd name: the MAF sensor. You may have never even heard of a MAF sensor, but its important that it be working correctly, or you may be experiencing some fairly significant engine issues... More

Giving CV Joints the Boot! (CV Joint and Boot Replacement)

September 14, 2025

Ever wonder how your vehicles transmission is connected to your wheels? After all, when you hit a pothole or some other uneven part of a roads surface, there has to be something that can maintain the connection between the transmission and the wheel yet keep everything moving at the same speed. ... More