Automotive Tips from South Side Garage: Tire Replacement Overview
September 2, 2018
Tires are an expensive purchase, so knowing when tires should be replaced is important for Moore drivers. Tires will just wear out with normal use. The depth of the tread on your tire determines how well it will stop, start and steer – especially in wet conditions. 4/32th of an inch (3.2 mm) of tire tread is considered a safe amount of tread.
Uneven tread wear can be a symptom of other problems, and simply replacing your tires will not prevent the same uneven wear from happening to the new tires. At South Side Garage in Moore, we can inspect your tires for excessive or uneven wear. Unusual wear may lead to further inspection of steering, suspension or alignment problems. We can help with necessary repairs and with getting you the right tires for your needs.
Give us a call.
South Side Garage
2220 Pole Rd
Moore, OK 73160
405-308-1514
http://www.thesouthsidegarage.com
More articles from Southside Garage
Lean Times (Shocks and Springs)
February 8, 2026
You may have noticed your vehicle going through lean times. By that, we mean it's literally leaning to one side. When you notice that, you should get it checked out at your service facility soon because you could have a serious problem. Many things can cause a vehicle to lean. You may have pro... More
Easy on the Wheel (Power Steering)
February 1, 2026
Steering a vehicle these days doesn't take much effort, but if you got behind the wheel back before power steering was invented, you'd need to practically have the strength of Hercules to turn the wheel. The first power steering systems widely available changed everything. Chrysler introduced... More
The Little Valve that Could (PCV Valve Replacement)
January 25, 2026
It's easy to get letters like PVC and PCV mixed up. PVC is a plastic that's used in a lot of things, especially plumbing pipes. And PCV is a valve that helps your engine burn off excess fumes rather than having them pollute our atmosphere. PCV stands for positive crankcase ventilation. When y... More